SLHB-15型雙滾筒瀝青混凝土攪拌設備

（一）詳細技術說明

我廠研制開發的SLHB-15型移動式瀝青混凝土攪拌設備整套設備包含：礦料提升機、燃燒爐總成、烘干滾筒總成、攪拌滾筒總成、熱瀝青計量輸送裝置、石粉計量輸送裝置、成品料倉、一級管式除塵裝置、拖掛底盤、行走裝置、電器控制柜等主要部件。主機采用烘干滾筒、攪拌滾筒與中間過料裝置連為整體的拖掛結構形式。整機占地面積小，移場就位安裝周期短，燃料適用范圍廣，具有操作簡單，維護方便，性能穩定可靠，成品料品質好，技術含量高，自動化、標準化程度高等特點，特別適用于高等級瀝青路面的鋪筑施工和養護作業。

SLHB-15型具體性能特點如下：

1、主機可整體拖掛移動，安裝就位簡捷方便。

2、采用液壓調整支撐腳，安裝調整省力、省時，穩定可靠。

3、烘干滾筒部件采用厚16Mn鋼制作。

4、采用一級旋風除塵裝置，除塵效果較好。

5、熱瀝青計量輸送裝置采用瀝青泵輸送、液位繼電器計量，油石比準確。

6、電器控制柜關鍵元器件，均采用國際名牌元件，包括：

　　   按鈕、接觸器、電機啟動器、塑殼開關、接線端子：西門子；

　 　  PLC可編程控制器、可編程顯示器、時間繼電器：三菱。

7、電機采用國產名牌：廈門電機

8、燃燒爐為燃煤、油兩用型，采用電子自動點火裝置，適用燃料范圍包括：柴油、重油、渣油等可燃油。在控制室中可直接調節火焰大小，控制成品料出料溫度，滿足不同施工要求。熱能高，燃料消耗量低。

9、本設備有效地克服了國內直筒連續式攪拌設備的固有缺陷，包括：

⑴石粉容易散失；

⑵瀝青容易老化；

⑶礦料及瀝青連續計量精度難以保證；

⑷礦料溫度不夠穩定等。

（二）主要性能參數

1、額定生產率           15t/h

2、進料容積             0.55立方米

3、進料重量             0.75噸/斗

4、出料溫度             120-165℃可調

5、適用范圍             瀝青混凝土、瀝青砂石、瀝青砂

6、燃料消耗             柴油5.5-8kg/t混合料；煤 12-15kg/t混合料

7、烘干滾筒轉速         16轉/分

8、主機功率：           燃油型:32.5kw；燃煤型:51kw

其中：

滾筒驅動功率：       5.5KW×2

鼓風機功率：         4KW

通風除塵功率：       5.5KW

骨料提升功率：       4.5KW

瀝青泵功率：        2.2KW×2

石粉提升功率：       0.8KW

成品料提升功率：     4.5KW

柴油泵功率：        0.55kw+1.1kw

空壓機功率：        2.2KW

加熱板：             0.45KW×4(施工前使用)

磨煤送粉裝置：       18.5KW（燃煤粉選用）

控制驅動方式：       集中PLC電控

主機重量：           8.3噸

SLHB-15 Type Double Drum Asphalt Concrete Mixing Plant
(1) Detailed Technical Description
The complete set of SLHB-15 mobile asphalt concrete mixing equipment developed by our factory includes: mineral material elevator, combustion furnace assembly, drying drum assembly, mixing drum assembly, hot asphalt metering and conveying device, stone powder metering and conveying device, finished product silo, primary tubular dust removal device, trailer chassis, traveling device, electrical control cabinet and other main components. The main machine adopts a trailer structure form in which the drying drum, mixing drum and intermediate material conveying device are integrated. The whole machine occupies a small area, has a short installation period for relocation and positioning, a wide range of fuel applicability, and features simple operation, convenient maintenance, stable and reliable performance, good quality of finished products, high technical content, and high levels of automation and standardization. It is particularly suitable for the construction and maintenance of high-grade asphalt pavement.
The specific performance characteristics of the SLHB-15 model are as follows:
1. The main unit can be towed and moved as a whole, and it is simple and convenient to install and position.
2. The support feet are adjusted hydraulically, which makes installation and adjustment effortless, time-saving, stable and reliable.
3. The components of the drying drum are made of 16Mn steel with a thickness of 16mm.
4. A first-stage cyclone dust collector is adopted, which has a relatively good dust removal effect.
5. The hot asphalt metering and conveying device adopts asphalt pumps for conveying and liquid level relays for metering, ensuring accurate oil-to-stone ratio.
6. The key components of the electrical control cabinet are all made of internationally renowned brand elements, including:
（1）.Buttons, contactors, motor starters, molded case circuit breakers, terminal blocks: Siemens;
（2）PLC programmable controller, programmable display, time relay: Mitsubishi.
7. The motor adopts a well-known domestic brand: Xiamen Motor.
8. The combustion furnace is a dual-purpose type for both coal and oil, equipped with an electronic automatic ignition device. The applicable fuel range includes diesel, heavy oil, residual oil and other combustible oils. The flame size can be directly adjusted in the control room to control the discharge temperature of the finished material, meeting different construction requirements. It has high thermal energy and low fuel consumption.
9. This equipment effectively overcomes the inherent defects of domestic straight-tube continuous stirring equipment, including:
⑴ Stone powder is prone to scattering.
⑵ Asphalt is prone to aging.
⑶ The continuous measurement accuracy of mineral materials and asphalt is difficult to guarantee;
⑷ The temperature of the mineral materials is not stable enough, etc.
Main Performance Parameters
1.Rated production capacity: 15 tons per hour
2. Feeding volume: 0.55 cubic meters
3. Feeding weight: 0.75 tons per bucket
4. Discharge temperature: Adjustable from 120 to 165℃
5. Scope of Application: Asphalt concrete, asphalt macadam, asphalt sand
6. Fuel consumption: 5.5 - 8 kg of diesel per ton of mixture; 12 - 15 kg of coal per ton of mixture.
7. Drying drum speed: 16 revolutions per minute
8. Main engine power: Diesel type: 32.5 kw; Coal-fired type: 51 kw
Among them:
Roller drive power: 5.5KW × 2
Blower power: 4KW
Ventilation and dust removal power: 5.5KW
Aggregate lifting power: 4.5KW
Power of asphalt pump: 2.2KW × 2
Power increase of stone powder: 0.8KW
Finished product material lifting power: 4.5KW
Diesel pump power: 0.55kw + 1.1kw
Air compressor power: 2.2KW
Heating plate: 0.45KW × 4 (used before construction)
Coal grinding and powder feeding device: 18.5KW (for pulverized coal selection)
Control drive mode: Centralized PLC electrical control
The weight of the main unit: 8.3 tons